Testing Separator

Testing Separator / Guan Yu is equipped with modern facilities in R&D, manufacturing and inspection.

Testing Separator

GY-200

Directions 1
  • Prior to operate the separator, ensure all the components are fastened, no broken on the sieves, no damage on the machine body, electrical cables are connected properly (do not use a knife switch), and three phase power supply is ready.
  • Please check whether the machine model and specification are the same as your order. Power supply is the same as shown on the machine plaque. (Tolerance for voltage is + / - 10 %)
Preparation
  • Place screen pots with required mesh onto the machine base sequentially.
  • Feed raw material on the top screen pot, and then close the lid.
  • Adjust the height of telescope poles accordingly and fasten the telescope knobs. Tighten the two black screen pot holding knobs to secure the lid.
Operation
  • When power supply is on, the red power indicator comes on.
  • Set the timer ( between 0 – 30 minutes ).
  • Switch the start button, the green indicator comes on and machine starts working until the setting timing is up.
Directions 2
  • Check the electrical components and all moving parts regularly during operation. Adjust if needed.
  • This machine is guaranteed for one year under normal operating condition. Please contact our offices or distributors should any irregularity arise during the one-year warranty period. Do not under any circumstances attempt to make any repairs or replacements.

Configuration

  • Screen pot holding knob.
  • Telescope pole.
  • Screen pot.
  • Ventilation hole.
  • Shock absorption rubber.
  • Power.
  • Telescope knob.
  • Machine base.
  • Timer.
  • Power.
  • Indicator.
Specification
MotorVoltageFrequencySpeeds (R.P.M)
0.3 HPSingle phaee: 110 V / 220 V
Three phase: 220 V / 380 V / 415 V
50Hz / 60Hz1440 / 1720

Maintenance

  • Turn off power supply when the machine is not in use for an extended period of time.
  • Clean the screen pots after operation, so they will be ready for use next time.
  • Do not splash water on the machine to avoid current leakage.
  • Turn the machine off immediately in the event of unusual noises and inspect for blockage or other irregularities.
  • Always ensure the black knobs are securely tightened before operation.
ecatalog Download



Menu

Best Sale

Testing Separator | Industrial Vibratory Screen Separator | Iron Remover Supplier - Guan Yu

Based in Taiwan, Guan Yu Machinery Factory Co., Ltd. is a high capacity Testing Separator | industrial vibratory screen separator and iron remover (magnetic separator) supplier, since 1981.

Vibratory screen separators such as multi-layer and sealed, cover rim, vertical discharge, high frequency, ultrasonic and rectangular, which are designed with no blockage on screen, high efficiency, applicable for 400 mesh or finer.

Heavy duty, revolving, drawer, automatic electromagnetic iron removers are compact, light weight and easy to operate.

Guan Yu's vibratory screen separators and iron removers divide grading materials into various industries with total solutions. With both advanced technology and 42 years of experience, Guan Yu makes sure to meet each customer's demands.


Hot Products

High Frequency Vibration Separator

High Frequency Vibration Separator

Our famous high frequency vibration separator with multifunction tasks.

Read More
Vibration Separator for Avoiding Material Get Together

Vibration Separator for Avoiding Material Get Together

Description; is best for powder or sticky material with many set for more choice, Applications:This unit is ideally for food processing, pharmaceutical, chemical, cosmetics, and other industries. It is mainly...

Read More
SCREEN SEPARATOR -Type Vibratory Separator

SCREEN SEPARATOR -Type Vibratory Separator

THE sieving machine (Separator) is an industrial gyroscope screen that is used in almost all processing industries, including pharmaceutical, chemical, plastics and food. Such rotary vibratory separators...

Read More